- Connect the MIDI OUT pigtail of the TOWPS to the MIDI IN connection of your synthesizer.
- Connect the provided Mini-DIN Cable to the Mini-DIN connector of the TOWPS.
- Connect the other end of the WX Cable to your WX instrument, or to your WX Cable. If using your own WX Cable, that should be connected to your WX instrument.
- Plug the DC connection of the Power Supply into the TOWPS before connecting it to AC Power; connecting to AC power turns on the TOWPS immediately.
- The power LED (adjacent to the DC Input on the TOWPS) should glow steadily, and if you're using a Type 2 TOWPS, the LEDS adjacent to the WX port should slowly fade in and out. If this does not happen, IMMEDIATELY disconnect the power; there may be a problem with the TOWPS.
- Turn on your WX and Synthesizer and play away!
Problems? Contact me.
|
